Installing The Grip; Installing The Dust Extraction Hose - Makita LS1019 Instruction Manual

1
2
3
6
1 Switch trigger
5 Hose (for dust
extraction)
9 Dust bag
13 Latch lever (for bevel
angle)
INSTALLATION

Installing the grip

Screw the threaded shaft of the grip into the turn base.
► 1. Grip 2. Turn base

Installing the dust extraction hose

Connect the dust extraction hose to the tool as illustrated.
Make sure that the elbow and the sleeve fit properly to
the ports of the tool.
4
7
2 Lock-off button
6 Stopper pin (for carriage
elevation)
10 0° adjusting bolt (for
bevel angle)
14 Pointer (for bevel angle)
1
2
5
12
8
3 Hole for padlock
7 Guide fence (lower
fence)
11 Bevel angle scale
15 45° adjusting bolt (for
bevel angle)
4
2
3
► 1. Dust extraction hose 2. Elbow 3. Sleeve 4. Port
7 ENGLISH
9
10
11
15
13 14
4 Switch (for laser line)
8 Guide fence (upper
fence)
12 Releasing lever (for 48°
bevel angle)
-
4
-
1