Using The Cooktop; Cooking Areas - LG LSE309OST Owner's Manual

18 USING THE COOKTOP
USING THE COOKTOP
COOKING AREAS
The cooking areas on your range are identified by
permanent circles on the glass cooktop surface. For the
most efficient cooking, fit the pan size to the element size.
Pans should not extend more than 1/2 to 1-inch
beyond the cooking area.
When a control is turned on, a glow can be seen through
the glass cooktop surface. The element will cycle on and
off to maintain the preset heat setting, even on Hi.
For model : LSE3092ST, LSES302ST
Hot surface indicator light
Using the cookfop elements
To turn on a SINGLE element (left and right rear
elements}:
1. Push the single element knob in.
2. Turn the knob in either direction to the setting you want.
The control knob clicks when it is positioned at both
OFF and HI.
For model
: LSE3092ST_ LSES302ST
a
r
m.
V
Double Elemet Warming zone
,
Single element Triple,Element
For model : LSE309OST
Hof surface indicafor (On
some models)
The hot surface indicator light will glow as long as any
surface cooking area is too hot to touch.
It will remain on after the element is turned offand until
the surface has cooled to approximately 150°F.
CAUTION -"I
Itisnormal forthe surfaceelements to cycle on and
offduring cooking, even on higher settings. This
willhappen more frequently if cooking on a lower
For model : LSE309OST
a
r
v
Double Elemet Single element
a
m.
V
Single element Single element
' l
.... NOTE
• Hi is the highest temperature available.
• Lo is the lowest temperature available.
• NEVER leave food on the cooktop unattended. Spillovers
can cause smoke. Greasyspillovers may catch on fire.
•The oven surface element may appear to have cooled
after it has been turned OFEThe element may still be hot
and burns may occur if this element is touched before it
has cooled sufficiently.