Fluke 1732 User Manual page 47

Date/Time Zone
The logger stores the measurement data in universal time coordinate
(UTC) to ensure continuity in time and accounts for time changes due
to daylight saving time (DST).
To display the time stamps of the measurement data correctly, it is
required to set the time zone. The Logger adjusts automatically to
DST. For example, a 1-week measurement started on 2-Nov-2013
8:00 am ends on 9 Nov-2013 08:00 am even though the clock was set
back on 3-Nov-2013 from 02:00 to 01:00.
To set the time zone:
1. Push  .
2. Push  (Instrument Settings).
3. Push  /  to highlight Time Zone and push
Zone target.
4. Select the regions/continents.
5. Push  .
6. Continue to select the country/city/time zone until the time zone
configuration is done and the Instrument Settings menu shows.
To set the date format:
1.
2.
3.
4.
5.
6.
To change the time:
1.
2.
 or touch Time
3.
4.
5.
Push  .
Push  (Instrument Settings).
Push  /  to highlight the Date Format target and push
touch the Date Format target.
Select one of the available date formats.
Push  to toggle between a 12 hour or 24 hour format. A
preview of the configured date format shows on the display.
Push  to confirm the selection.
Push  .
Push  (Instrument Settings).
Push  /  to highlight the Time target and push
the Time target.
Touch the + and – targets for each field.

Push to confirm the change and exit the screen.
Energy Logger
Function Selection Buttons
 or
 or touch
41