Fluke 1732 User Manual page 46

1732/1734
Users Manual
Name for Instrument
You can assign a name to the Logger. This name is attached to the
measurement files when you review these files in Energy Analyze
Plus software. The default name is FLUKE173x<serial number>, for
example: FLUKE1734<12345678>.
To change the instrument name:
1. Push  .
2. Push  (Instrument Settings).
3. Push  /  to highlight Instrument Name field and push
touch the Instrument Name target.
Revert to the default name by a reset to factory defaults. See Reset to
Factory Defaults on page 44 for more information.
Language
The user interface of the Logger is available in multiple languages.
To change the display language:
1. Push  .
2. Push  (Instrument Settings).
3. Push  /  to move the screen highlight to Language field and
push  or touch the Language target.
4. Push  /  to move through the language list.
5. Push  to activate the new language.
The language immediately updates on the screen.
40
Phase Color/Phase Labels
The phase colors are configurable to match with the connector panel
decal:
Scheme
US
Canada
EU
 or
UK (old)
China
To change the phase color/phase labels:
1. Push 
2. Push 
3. Push  /
target.
4. Select one of the available schemes.
5. Push 
.
L1-L2-L3
6. Push 
A/L1 B/L2
black red blue
red black blue
brown black gray
red yellow blue
yellow green red
.
(Instrument Settings).
 to highlight Phases and push
to toggle the phase label between
to confirm the selection.
C/L3 N
white
white
blue
black
blue
 or touch Phases
and
A-B-C