Advertisement
Advertisement
Table of Contents
Summary of Contents for Lumenier DLUX OSD
- Page 1 User Manual DLUX OSD v1.0...
- Page 2 DLUX Overview The DLUX is an OSD (On Screen Display) that is used to embed many different types of telemetry data from the Flight Controller on to the transmitted video. The DLUX utilizes MinimOSD to configure the settings and graphics display layout. To learn more about MinimOSD and download the Configuration Tool please go to: ...
- Page 3 Full Pinout (Pins 1-7) 1. U 1 TX (USART) - The DLUX communicates information and sends request to the RX on the flight controller. 2. U 1 RX (USART) - The telemetry information comes in from the TX on the flight controller. 3.
- Page 4 Full Pinout (Pins 8-14) 8. U 3 TX (USART) - The DLUX can use this as an alternative way communicate information and sends request to the RX on the flight controller or an alternate RX on another source like a GPS.
- Page 5 Power Logic & Configuration The DLUX can be configured to provide multiple power configurations. RAW or 12V - T he option to send the Raw Battery power or the Regulated 12V power though the 12V connections on the CAM and VTX Pins. VTX &...
- Page 6 Advanced Use of the RX / TX Connections The DLUX can be configured to change the U3 RX / TX Pins to be U1 RX / TX.
- Page 7 Setup in CleanFlight 1. P ort Settings - In this setup we are using UART1 (T1 & R1) on a Lux Flight Controller. Set the UART RX / TX Pins that you have connect the DLUX U1 or U3 to M SP on at 115200 .
- Page 8 Setup in CleanFlight (Continued) 2. C onfiguration Settings - Turn the T elemetry Output On . That is it!