Related Manuals for Lumenier JohnnyFPV QAV-S
Summary of Contents for Lumenier JohnnyFPV QAV-S
- Page 2 USE THE SPLIT PLATE TOP, THE X ISOLATION PLATE AND 4 X 25MM SCREWS TO SECURE BOTH PLATES. USE THE SPLIT PLATE BOTTOM, THE ARM SUPPORT WEDGES, AND 2 X 12MM SCREWS TO COMPLETE THE BOTTOM PLATES ASSEMBL Y. AFTER ASSEMBLING THE BOTTOM PLATE SYSTEM, SLIDE IN THE 4 ARMS AND SECURE THEM WITH 4 X 25MM STANDOFF AND...
- Page 3 USE THE CAMERA PLATE ORIENTATION ABOVE FOR MINI (23MM WIDE) FPV CAMERAS USE THE CAMERA PLATE ORIENTATION ABOVE FOR MICRO (20MM WIDE) FPV CAMERAS...
- Page 4 MOUNT AND SECURE THE DJI AIR UNIT WITH THE CUSTOM MOLDED FOAM, AND USE THE ANTENNA HOLDER WITH THE RUBBER O-RING TO MOUNT THE ANTENNAS IN PLACE. SECURE THE TOP PLATE TO THE STANDOFF AND CAMERA PLATES BY USING 6 X 6MM COUNTERSINK SCREWS.
Need help?
Do you have a question about the JohnnyFPV QAV-S and is the answer not in the manual?
Questions and answers