Maintenance; Handlebar Set Up - ISLABIKES Beinn Owner's Manual

Maintenance

Keeping your bike clean and maintained comes with many benefi ts.
Not only will your Islabike perform better but it will be safer, last
longer and look great. To do this we have listed some regular checks
to help you along the way. Of course, if you are unsure of anything
we strongly recommend you seek professional advice or contact our
technical support team at 503 954 2410 or email
support@islabikes.com.
Firstly, moving parts on your bike will need lubricating from time to
time. Weather conditions are generally the biggest factor that
determine frequency of maintenance and lubrication. However, it is
also heavily dependent on the frequency, type and duration of riding.
Component Lubricant
Chain Oil
Brake cables Oil
Wheel bearings Grease
Pedals n/a
Headset n/a
Bottom bracket n/a
Beinn 20 Small / Beinn 20 L / Beinn 24 / Beinn 26 S / Beinn 26 L
Frequency
Weekly or after washing / rain
Weekly or after washing / rain
6 months
Sealed bearings
Sealed bearings
Sealed bearings
Step 4 of 6

Handlebar set up

(Only required if fenders are fi tted)
Turn
a. Turn handlebars clockwise and align with front wheel
b. Tighten stem clamp bolt max. 7Nm
Failure to correctly tighten stem clamp bolt may result in serious
injury or death. If in doubt, please consult our technical support
team at 503 954 2410 or email support@islabikes.com.
E-mail: support@islabikes.com
Do Not
Tighten
Tighten
Telephone: 503 954 2410