Table of Contents
Advertisement
5. Stow the mini-latch in the
holder in the headliner.
6. Press and hold the switch (2)
on the side trim of the cargo
area to fold the third row
seatback.
The left switch folds the left
seatback, and the right switch
folds the right seatback.
7. Repeat the steps for the other
seatback, if desired.
The switches (1) can be used to fold
or fold and tumble the second row
seats from the cargo area. See
Second Row Seats 0 69.
Returning the Third Row
Seatback to the Upright
Position
1. Second Row Power Seat
Fold and Tumble Switches
2. Third Row Power Seat Fold
and Raise Switches
To return the third row seatback to
the upright position:
1. Open the liftgate to access the
controls for the seat.
2. Press and hold the switch (2)
on the side trim of the cargo
area to raise the third row
seatback.
Seats and Restraints
The left switch raises the left
seatback, and the right switch
raises the right seatback.
Warning
A seat belt that is improperly
routed, not properly attached,
or twisted will not provide the
protection needed in a crash. The
person wearing the belt could be
seriously injured. After raising the
rear seatback, always check to be
sure that the seat belts are
properly routed and attached, and
are not twisted.
3. Reconnect the center seat belt
mini-latch to the mini-buckle.
Do not let it twist.
4. Pull on the seat belt to be sure
the mini-latch is secure.
5. Repeat the steps for the other
seatback, if desired.
75
Advertisement
Chapters
Table of Contents
