Led Lighting; Fog Lamps; Back-Up Lamps - GMC YUKON 2018 Owner's Manual

LED Lighting

This vehicle has several LED lamps.
For replacement of any LED lighting
assembly, contact your dealer.

Fog Lamps

To replace the front fog lamp bulb:
1. Locate the fog lamp under the
front bumper.
2. Disconnect the electrical
connector from the fog lamp
bulb assembly by pressing the
connector release.
3. Turn the bulb counterclockwise
to remove it from the housing.

Back-Up Lamps

To replace a back-up bulb:
1. Open the liftgate. See Liftgate
0 43.
2. Remove the taillamp closeout
cover from the lamp assembly
by pulling rearward from the
top and bottom at the same
time to unfasten the snap tabs.
Vehicle Care
3. Remove the two screws from
the taillamp assembly.
4. Pull the taillamp assembly
straight back to remove.
307