GMC YUKON 2018 Owner's Manual page 156

Some vehicle messages or alerts
displayed in the HUD may be
cleared by using the steering wheel
controls. See Vehicle Messages
0 157.
Some information shown may not
be available on your vehicle if it is
not equipped with these features.
The HUD control is to the left of the
steering wheel.
To adjust the HUD image:
1. Adjust the driver seat.
2. Start the engine.
3. Use the following settings to
adjust the HUD.
: Press down or lift up to center
the HUD image. The HUD image
can only be adjusted up and down,
not side to side.
: Press to select the display
view. Each press will change the
display view.
: Lift up and hold to brighten the
display. Press down and hold to dim
the display. Hold down to turn the
display off.
The HUD image will automatically
dim and brighten to compensate for
outside lighting. The HUD
brightness control can also be
adjusted as needed.
The HUD image can temporarily
light up depending on the angle and
position of the sunlight on the HUD
display. This is normal.
Polarized sunglasses could make
the HUD image harder to see.
Head-Up Display (HUD) Rotation
Option
This feature allows for adjusting the
angle of the HUD image.
Instruments and Controls
Press on the steering wheel
controls while Head-up Display
Rotation is highlighted to enter
Adjust Mode. Press
adjust the angle of the HUD display.
Press or to highlight OK, then
press to save the setting.
CANCEL can also be selected to
cancel the setting. The vehicle must
be in P (Park). See Instrument
Cluster 0 133.
Press on the steering wheel
controls while Head-up Display
Rotation is highlighted to enter
Adjust Mode. Press
adjust the angle of the HUD display.
Press or to highlight OK, then
press to save the setting.
CANCEL can also be selected to
cancel the setting. The vehicle must
be in P (Park). See Instrument
Cluster 0 133.
HUD Views
There are four views in the HUD.
Some vehicle information and
vehicle messages or alerts may be
displayed in any view.
155
y z
or to
y z
or to