System; Remote Vehicle Start; Door Locks - GMC YUKON 2018 Owner's Manual

Hide thumbs Also See for YUKON 2018:
Table of Contents

Advertisement

: Press to lock all doors.
Lock and unlock feedback can be
personalized. See Vehicle
Personalization 0 158.
: Press twice to open or close
the liftgate. Press once to stop the
liftgate from moving.
: Press twice to open the
liftglass.
: Press and release to initiate
vehicle locate. The turn signal
lamps flash and the horn sounds
three times.
Press
and hold for more than
three seconds to sound the panic
alarm.
Press
again to cancel the panic
alarm.
See Keys (Keyless Access) 0 27 or
Keys (Key Access) 0 28 and
Remote Keyless Entry (RKE)

System 0 31.

Remote Vehicle Start

The engine can be started from
outside of the vehicle.
Starting the Vehicle
1. Press and release
RKE transmitter.
2. Immediately press and hold
for at least four seconds or until
the turn signal lamps flash.
Start the vehicle normally after
entering.
When the vehicle starts, the parking
lamps will turn on.
Remote start can be extended.
Canceling a Remote Start
To cancel a remote start, do one of
the following:
Press and hold
until the
parking lamps turn off.
Turn on the hazard warning
flashers.
Turn the vehicle on and then off.
See Remote Vehicle Start 0 39.

Door Locks

To lock or unlock the doors from
inside the vehicle:
Press
lock switch.
on the
Pushing down the manual lock
knob on the driver door will lock
all doors. Pushing down the lock
knob on a passenger door will
lock that door only.
Pulling the door handle once will
unlock that door. Pulling the
handle again will unlatch it.
To lock or unlock the doors from
outside the vehicle press
the RKE transmitter.
See Remote Keyless Entry (RKE)
System Operation (Key Access)
0 31 or Remote Keyless Entry
(RKE) System Operation (Keyless
Access) 0 33.
In Brief
9
or
on a power door
or
on

Advertisement

Table of Contents
loading

This manual is also suitable for:

Yukon xl 2018Yukon denali 2018

Table of Contents