GMC YUKON 2018 Owner's Manual page 372

Hide thumbs Also See for YUKON 2018:
Table of Contents

Advertisement

a year and the oil life system must
be reset. Your trained dealer
technician can perform this work.
If the engine oil life system is reset
accidentally, service the vehicle
within 5 000 km/3,000 mi since the
last service. Reset the oil life
system when the oil is changed.
See Engine Oil Life System 0 285.
Tire Rotation and Required
Services Every 12 000 km/
7,500 mi
Rotate the tires, if recommended for
the vehicle, and perform the
following services. See Tire
Rotation 0 334.
Check engine oil level and oil
life percentage. If needed,
change engine oil and filter, and
reset oil life system.
See Engine Oil 0 283 and
Engine Oil Life System 0 285.
Check engine coolant level. See
Cooling System 0 291.
Check windshield washer fluid
level. See Washer Fluid 0 296.
Visually inspect windshield wiper
blades for wear, cracking,
or contamination. See Exterior
Care 0 360. Replace worn or
damaged wiper blades. See
Wiper Blade Replacement
0 303.
Check tire inflation pressures.
See Tire Pressure 0 327.
Inspect tire wear. See Tire
Inspection 0 333.
Visually check for fluid leaks.
Inspect engine air cleaner filter.
See Engine Air Cleaner/Filter
0 290.
Inspect brake system. See
Exterior Care 0 360.
Service and Maintenance
Visually inspect steering,
suspension, and chassis
components for damaged, loose,
or missing parts or signs of wear
at least once a year. See
Exterior Care 0 360. Lubricate
the suspension and steering
components at least every other
oil change (if equipped with
grease fittings).
Check restraint system
components. See Safety System
Check 0 83.
Visually inspect fuel system for
damage or leaks.
Visually inspect exhaust system
and nearby heat shields for
loose or damaged parts.
Lubricate body components. See
Exterior Care 0 360.
Check starter switch. See Starter
Switch Check 0 302.
371

Advertisement

Table of Contents
loading

This manual is also suitable for:

Yukon xl 2018Yukon denali 2018

Table of Contents