You can also press
mode by default.
Using the Function Menu
In standby mode, press
1.
Press
2.
Press
3.
Press
4.
Press
5.
Press
6.
the function menu.
To return to the standby mode, press
Phone Code
The phone code is used to restore factory settings.
The phone code is set to 0000 by default. You can select Menu
> Settings > Security Settings > Change Security Code
> Change Phone Code to change the phone code into any
numeric string of four to eight digits.
Do remember your phone code. If you forget the phone code,
contact the service center.
to turn on or off the torch in standby
to select the desired function menu.
(Select) or
or
to select the desired submenu.
(Select) or
(Back) to return to the previous menu or exit
(Menu) or
to display the selected menu.
to display the submenu.
7
.
.