ACCURACY, RELIABILITY OR CONTENTS OF THIS MANUAL. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO CASE SHALL HUAWEI TECHNOLOGIES CO., LTD BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, OR LOST PROFITS, BUSINESS, REVENUE, DATA, GOODWILL OR...
Features marked with "optional" are optional. These features may vary according to service providers. For details, contact your service provider. Getting to Know Your Phone Your Phone The following figure shows the appearance of your phone and is provided for your reference only. Earpiece Microphone Charger/Headset...
Navigation keys End/Power key Left soft key Right soft key Call/Answer key Confirm key Keys and Functions Press … To … Make a call. Answer an incoming call. View call logs in standby mode. Power the phone on or off (press and hold the key ...
Press … To … Enter numbers, letters, and symbols. Call voicemail in standby mode (press and hold the 1 key for about 3 seconds). Speed-dial phone numbers in standby mode (press – and hold the 2–9 keys for about 3 seconds). Select an option labeled with the corresponding ...
Icon Indicates … The alert type is Vibrate then ring The alert type is Light only. The earphone is plugged (Optional). Missed calls. Call forwarding enabled. New text messages. Alarms activated. Keypad locked. Battery level. Getting Started Installing the SIM Cards and the Battery You can install up to two subscriber identity module (SIM) cards in the phone at the same time.
To enable dual-SIM mode, power on the phone, select Dual SIM open. Installing a microSD Card Charging the Battery Connect the charger to an AC power socket. Connect the charger to the phone's charger jack. Wait until the battery is fully charged. While the battery is charging, the charging icon blinks.
Disconnect the charger from the phone. Disconnect the charger from the AC power socket. Phone Lock The phone lock protects your phone from unauthorized use. By default, the phone lock is disabled. You can change the preset phone unlock code (1234) to any number of four to eight digits. If you forget the phone unlock code, contact your service provider.
Voice Services Making a Call In standby mode, enter a phone number. To make an international call, press twice to enter the plus sign (+). Then enter the country code or region code, area code, and phone number. To call an extension, enter the phone number, press three ...
Press (Silence) to mute the speaker, and then press (Reject) to reject the call. If the any key answer function is enabled, you can press any key except to answer a call. Text Input Changing the Text Input Mode The current text input mode indicator is displayed in the upper left corner of the screen.
Entering a Letter In multi-tap input mode, press the key labeled with the desired letter once to enter the first letter on the key, twice to enter the second letter, and so on. Entering a Digit In number input mode, simply press the number key labeled with the desired digit.
Contacts Creating a Contact Select Menu > Phonebook> Add new contact. Edit the contact information. Press to save the contact. Searching for a Contact Select Menu > Phonebook> Contacts. Enter the first letter of the contact name in the search bar. Contacts who have names that start with this letter will be displayed.
FM Radio Connect the headset to the phone before you attempt to listen to an FM radio station. The headset cable also functions as the radio’s antenna when it is turned on. To ensure the best possible reception and therefore audio quality, do not unplug the headset or severely bend or twist the headset cable.
about how to use the device safely. Read this information carefully before using your device. Electronic Device Power off your device if using the device is prohibited. Do not use the device when using the device causes danger or interference with electronic devices.
manufacturers of vehicles using liquefied petroleum gas (such as propane or butane) whether this device can be safely used in their vicinity. Traffic Security Observe local laws and regulations while using the device. In addition, if using the device while driving a vehicle, comply with the following guidelines: Concentrate on driving.
On a stormy day with thunder, do not use your device when it is being charged, to prevent any danger caused by lightning. When you are on a call, do not touch the antenna. Touching the antenna affects the call quality and results in increase in power consumption.
The battery can be charged and discharged hundreds of times before it eventually wears out. When the standby time and the talk time are shorter than the normal time, replace the battery. Use the AC power supply defined in the specifications of the ...
vapor. Do not touch the device or the charger with a wet hand. Otherwise, it may lead to a short circuit, a malfunction of the device, and an electric shock to the user. Do not place your device, battery, and charger in places where ...
0.394 W/kg, and when properly worn on the body is 0.254 W/kg. EU Regulatory Conformance Hereby, Huawei Technologies Co., Ltd. declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
Page 20
Notice: Observe the national local regulations in the location where the device is to be used. This device may be restricted for use in some or all member states of the European Union (EU). Version: 01 NO.: 6010830...