Using Caller Id Service; Talking Caller Id - Panasonic KX-THA 16 Operating Instructions Manual

2.4 ghz expandable cordless unit
Table of Contents

Advertisement

Temporary Confidential
Caller ID Service

Using Caller ID service

This unit is Caller ID compatible. To use
Caller ID features, you must subscribe to
your telephone company's Caller ID
service.
Caller ID features
When an outside call is being received, the
calling party's name and telephone
number will be displayed.
Caller information for the last 50 different
callers will be logged in the caller list,
allowing you to return missed calls. Caller
information is stored by the most recent
call to the oldest.
L While listening to a message recorded
by the answering system, using the
handset, you can call back the caller
without having to dial the phone number.
L If the unit cannot receive caller
information, the following will be
displayed:
"Out of area": The caller dialed from
an area which does not provide Caller ID
service.
"Private caller": The caller
requested not to send caller information.
"Long distance": The caller called
you long distance.
L If the unit is connected to a PBX system,
caller information may not be received
properly. Consult your PBX supplier.

Talking Caller ID

This feature allows you to know who is
calling without looking at the display. When
a call comes in, the handset and base unit
will announce the caller's name displayed
on the handset following every ring.
To use this feature, you must subscribe to
your telephone company's Caller ID
service.
L Name pronunciation may vary. This
feature may not pronounce all names
correctly.
12
For assistance, please visit http://www.panasonic.com/consumersupport
L Caller ID supports names of up to 15
letters. If the caller's name has more
than 15 letters, the name will not be
displayed or announced correctly.
L Usually the unit will announce the
caller's name after the 2nd ring. If you
turn on the answering system, and set
the ring count to "2", the unit will not
announce the caller's name. If "Toll
saver" is selected, and there is a new
message, the unit will not announce the
caller's name.

Advertisement

Table of Contents
loading

Table of Contents