Funlux NVR Quick Start Manual page 7

4 In addition to viewing your system locally on your monitor
and remotely on your mobile device, you can also access
your system from any location with our web app. Just type
user.funlux.com into your web browser and log in using
your Funlux account information.
Mounting your cameras
4
If you're installing your cameras outdoors, all wired
connections must be weatherproofed.
Before you perform any permanent installation and route
wires, plug in your cameras to the NVR using the provided
cables to make sure no components were damaged during
shipping.
Before installing the cameras, carefully plan where and
how they will be positioned, and how you will route the
wiring that connects your cameras to the NVR.
1
Unplug the power adapters which have been connected in
part 2.
2
Line the camera bracket against the wall at the target area
and mark the appropriate holes. Drill three holes slightly
smaller than the wall anchor and use a hammer to gently
insert the anchors into the wall. Fasten the three screws
through the holes on the bracket and into the anchors.
Note: Depending on the camera model that you purchased, the camera
bracket may or may not be fastened onto the camera when first removed from
factory packaging.
6