Connecting Your System; Power Indicator - Funlux NVR Quick Start Manual

Power indicator:

Solid green
The NVR is powered on. No light means that the NVR
is off.
HDD indicator:
Solid green
There is no HDD, your HDD is not recording, or there
is a problem with your HDD.
Blinking green
The hard drive is recording properly.

Connecting your system

2
This quick guide will help you configure your NVR kit for
initial use. Follow the steps below and refer to the diagram
to connect your NVR system.
Power Supply
Camera
Power on the NVR by plugging it into a nearby power
1
outlet using the power adapter provided.
Connect the NVR to an empty network port on your WiFi
2
router using an ethernet cable (included).
Display
NVR
3
Connection Diagram
Wireless Router