Configuring Your System - Funlux NVR Quick Start Manual

3 Connect the cameras to the back of the NVR using the
provided simplified Power over Ethernet (sPoE) cables.
This cable will provide both video and power to your
cameras. Please connect all cameras and make sure that
they work before performing permanent installation.
(Optional) You can connect an external monitor to view
4
your NVR locally. Use the HDMI or VGA port (cable not
included) to connect your NVR to a local display, and
connect a USB mouse to control it.
Note: There will be no password when you first use your NVR locally. However,
we strongly recommend that you set a password after you configure your NVR.
Set a password by going to the Main Menu > General Settings > Account
Settings.
Safety Requirements
Place your NVR in a well-ventilated area.
Do not place any objects on top of your NVR.
Try to keep your NVR in a cool operating temperature.
Do NOT move or shake the NVR while operating, or else
the hard drive will be damaged.
Use a surge protector to protect the NVR from shortages.
Use only the provided power adapters with your products.
If water or any liquid comes into contact with the NVR,
unplug it immediately and contact Funlux support.

Configuring your system

3
Local Viewing
If you are accessing your system locally, please make
sure that you have properly connected your system (Part
2), and power on your NVR. Once you have logged into
your NVR interface, please wait 3-5 minutes for your
system to automatically add the cameras.
4