Accurate Technology 150 User Manual page 18

5. The Display may be mounted in a location which allows for easy viewing
by the operator. The location of all parts should also safeguard the
cable from possible damage. ProScale wiring should be kept away from
electrical wiring and motors. Plug the ReadHead into the Display. See
Section 4:
Note: If any other mounting method is used, observe the following:
•
Do not drill through the green portion of the Scale at any point over
which the ReadHead will travel.
•
Do not mount the Scale so the mounting hardware interferes with the
movement of the ReadHead.
Accurate Technology ProScale
D O
ISPLAY PERATION
Typical Model 150 Installations
Moving Part
Readhead stationary, Scale moves
M o vi n g pa rt
R ea d h ea d
Scale stationary, Readhead moves
.
Connector Link
Readhead
Scale
G ui de C li p
S c al e
Page 18 of 48