Reset To Factory Settings - Disty Notruf Operation Manual

distyNotruf,
Operation manual (short form)

Reset to factory settings

The settings you have made can be reset to the delivery condition. The programmed emergency
numbers are retained. To do this, please follow the steps below (distyNotruf must be
subscribed):
- connect the distyNotruf to the charging cable, the red LED will light up
- immediately after putting distyNotruf into charging mode, press & hold the alarm button for 10
seconds
- the green LED goes on
- release the alarm button before the LED goes out (5 sec. Time)
- a 450 Hz tone is heard and the red LED goes on & off after a while
- disconnect distyNotruf from the charging cable
- distyNotruf goes into "Power down" mode and switches off
- now it is un – subscribed and configured to the factory settings.
Operation manual 17