How To Wear The Distynotruf - Disty Notruf Operation Manual

distyNotruf,
Operation manual (short form)
How to wear the distyNotruf
The distyNotruf can be worn on the body in three different ways:
into the opposite holes.
For a disassembly of the wrist band, one presses the spring pin from the
outside of the bore with a needle or an office clip so that it can be
compressed and removed from the bore. The pre-assembled bracelet
can be replaced by a standard 22 mm watchstrap.
Operation manual
Option 1: Attaching the
The bracelet is already pre-assembled on the factory side. The
distyNotruf must be placed on the arm in such a way that the
charging socket/protection lid points towards the body. The shorter
end of the bracelet should be pulled through the opening of the
other half of the bracelet and tightened according to the arm
thickness. The two pins of the closure piece must be firmly pressed
distyNotruf to the wrist.
14