Disty Notruf Operation Manual page 15

distyNotruf,
Operation manual (short form)
approximate end position while inserting one side of the spring pin into
the hole provided for this purpose. Press the second side of the spring
pin towards the clip while holding the clip and press it into the final
position.
Operation manual
Option 2: Attach the clip to the belt.
Removing the spring clip (see paragraph for option 1) Remove the
spring pins from the bracelet and insert a spring pin on the side of the
charging jack. Press the inner part of the clip down to the bottom of
the clip and slide this tounge under the
mounted spring pin. Next, insert the spring
pin into the clip. Move the clip into the
Option 3: Fasten with the collar/Lanyard.
Firstly mount the belt clip as described above. Insert the neckband
under the outer flap.
15