Label Paper - Star SM-L300 Hardware Manual

5.1.2 Label Paper

Paper Width (W1)
Paper Thickness
Recording side
Maximum Roll Diameter (D)
Curling dimension (W2)
Axial
NOTE: Do not use roll paper whose end is glued to its core, because the printer will be unable to
properly detect the end of the paper. Also, we recommend that you use roll paper that
has a roll end mark at its end.
(1)Operating
a) Temperature : 0 to 50 degrees
b) Humidity : 20 to 85 % RH (No condensation)
*1 The combination of 50 degrees and 85% RH (No condensation) is considered the worst value
regarding high temperature and humidity. A higher humidity level higher than 80% combined with a
higher temperature can cause a problem if over a prolonged period of time (more than 4 hours).
(2)Recommended Paper
Manufacturer
RICHO
UPM
NOTE
1. Please use the recommended thermal paper or same quality paper, otherwise it will
influence the printing quality and decrease the thermal print head life.
Some types of the paper are not suitable for use of other than the recommended print
density settings.
2. When these paper are manufactured, since the end of paper of roll might be fixed by tape
with core, the printer might not be able to complete printing properly.
39.5±0.5mm to 79.5±0.5mm (2mm pitch)
Max. 150μm
Outside of roll
Ø57 mm
40+0.5-1 to 80+0.5-1 mm
Inner diameter Min Ø25.4±1
Outer diameter Min Ø30±1
Product Name
150PSMW
DT80W
44
Recommended density
High
MID