Table of Contents
Advertisement
Warning
Power supply
Ensure the source voltage matches the voltage of the power supply before turning on the amplifier. Unplug this
device when unused for long periods of time.
External connection
The external wiring connected to the output hazardous live terminals requires installation by an instructed
person.
Cover removing
Do not remove any cover if the power supply is connected. The cover should be removed by the qualified
personnel only. No user serviceable parts inside.
Fuse
To prevent fire, make sure to use fuses with specified standard. Do not use a different fuse or short circuit the fuse
holder. Before replacing fuse, turn off the amplifier and disconnect power source.
Protective grounding
Make sure to connect the protective grounding to prevent any electric shock before turning on the amplifier.
Never cut off or disconnect the internal or external grounding wire.
Operating conditions
To reduce the risk of fire or electric shock do not expose this amplifier in to rain or moisture. Do not use this
amplifier near water. Install in accordance with the manufacturer's instruction. Do not install near any heat sources
such as radiators, heaters, stoves or other apparatus that produce heat. Do not block any ventilations openings.
Important
Do not install this equipment in a confined
space such as a book case or similar unit.
The apparatus should not be dripped or
splashed and no objects filled with liquids,
such as vases, should not be placed on the
apparatus.
This unit should not be used near water (e.g.
near bathtub, washbowl, kitchen sink,
laundry tub, in a wet basement, or near a
swimming pool, etc.) Care should be taken so
than objects do not fall and liquids are not
spilled into enclosure through openings.
Advertisement
Table of Contents
