Advertisement
8. Pigtail cannot be tied and swerved as less as possible.
Swerving radius cannot be too small (small swerving causes
terrible loss of link). Its banding should be moderate, not too
tight, and should be separated from other cables;
9. It should have corresponding simple signal at both sides of the
cable for maintaining.
【Specification】
Ethernet Interface
Standard: 10/100Base-T(x)
Speed: 10/100M auto-sensing
Signal: Rx+, Rx-, Tx+, Tx-
Protocol: ARP, ICMP, UDP, TCP, IP, HTTP, DHCP, DNS
Working: Full-duplex and half duplex
Working mode: TCP Server, TCP Client, UDP
Transmission: 100m
Connector: RJ45
CAN-Bus Interface
Standard: CAN2.0A, CAN2.0B
CAN-Bus port number: 2
CAN-Bus signal: CANL, CANH
Band rate: 5K～1Mbps
Working mode: 2 wires, half duplex
Transfer distance: 40m~10Km
Load capacity: support 110 concurrent
LED indicator
Run indicator: RUN
Interface indicator: LINK
Power supply indicator: PWR
100M Speed indicator: SPEED
CAN-Bus port indicator: CAN1, CAN2
Power
Power input: 9~24VDC
Type of input: 4 bits terminal block
Load consumption: 1.5W@12VDC
Support reverse connection protection
Mechanical Structure
Shell: IP40 protect grade, metal shell
Installation: Wall mounts
Weight: 253g
Size (W×H×D): 94mm×70.6mm×26mm
Working environment
Working temperature: -40～75℃
Storage temperature: -40～85℃
Relative Humidity: 5%~95 %( no condensation)
Industry Standard
EMI: FCC Part 15, CISPR (EN55022) class A
EMS: EN61000-4-2 (ESD), Level 3
EN61000-4-4 (EFT), Level 4
EN61000-4-5 (Surge), Level 3
Shock: IEC 60068-2-27
Free fall: IEC 60068-2-32
Vibration: IEC 60068-2-6
Certification
CE, FCC, RoHS, UL508 (Pending)
Warranty: 3 years
- 4 -
Advertisement
