Orange Pi PC2 User Manual page 65

Orange Pi Manual
 It can be seen from the figure that TTL to the serial port cable is
identified as ttyUSB0, configure the /ect/kermit/kermitc file, update the
serial port information.
$ sudo vi /etc/kermit/kermitc
 Set the value of setline into /dev/ttyUSB0
4) Start debug
 Input command in the host computer terminal, enter the Kermit mode:
$ sudo kermit –c
www.orangepi.org
Copy right by Shenzhen Xunlong Software Co., Ltd
63 www.xunlong.tv