Orange Pi PC2 User Manual page 36

Orange Pi Manual
 Use the following command to compile the entire project
$ ./build.sh config
At this point the system will prompt the choice of the chip, as shown
below, for OrangePi, select sun50iw2p1
At this point, the system will be prompted to select the platform, as
shown below, for OrangePi, select Android
At this point, the system will be prompted the choice of the board, as
shown below, for the OrangePi, select dolphin-p1
Appear this interface indicates waiting for the compiler.
Wait fifteen minutes or so, compile complete.
www.orangepi.org
Copy right by Shenzhen Xunlong Software Co., Ltd
34 www.xunlong.tv