Orange Pi PC2 User Manual page 18

Orange Pi Manual
Details of Booting Steps
2)
a. Insert the TF card with written image in to the TF card slot.
b. It is HDMI interface on the bottom edge of the board. You could use
HDMI cable to connect your Orange Pi to HDMI TV or monitor.
You could also use AV interface and audio interface to connect output
video and audio to analog TV or display.
c. Insert USB keyboard and mouse into the USB interface.
d. It is the network port in the middle of 3USB interfaces, which you
can access Orange Pi to the wired network.
e. It is the power input interface on the right side for connecting a
power adapter up to or bigger than 5V/2A. Avoid using smaller
power GSM mobile phone charger, it is not able to output 2A even if
it marked "5V/2A ".
Note: Micro-USB （OTG） cannot use as power input which may cause the fail
boot of the OrangePi. Only the power interface could input power.
www.orangepi.org
Copy right by Shenzhen Xunlong Software Co., Ltd
16 www.xunlong.tv