Orange Pi PC2 User Manual page 26

Orange Pi Manual
required to log in with account of Thunder). Then click the tab on the top
right corner to add, fill in the activation code to complete the binding
according to the following figure.
vi Setting start up
$ sudo nano /etc/rc.loacl
add the following contents before exit 0
cd /xx/xunlei
./portal &
ctrl +o and enter, ctrl +x to save and exit.
d. Installation of version 3.0.32.253:
$ cd /xxx/xunlei
i
xunlei
$ sudo nano thunder_mounts.cfg Modify the download path
ii
iii chmod +x etm_monitor
iv Run ./etm_monitor, there will be an activation code page like
version 1.0.32. And then binding on the Thunder remote page (above steps 4,
5). There might be one or two errors while running, ignore it (selection type
of shell and generation of INI file).
v Setting start up
sudo nano /etc/rc.loacl
cd /xx/xunlei
www.orangepi.org
Copy right by Shenzhen Xunlong Software Co., Ltd
The xxx is the directory of installation file of
add the following contents before exit 0
24 www.xunlong.tv