Table of Contents
Advertisement
4.1.1
Site Survey Setup
This function provides you with scanning the wireless network; which means if any
Access Point is found, you could choose to connect it manually when the client
mode is enabled, and after you choose the desired Access Point; this name will be
listed automatically in the "SSID" of "Station Mode
check, please see the introduction below.
Click on "Rescan" will show information of AP.
If you choose the "120_Cliff" for the Access Point, and click on "Next" as below.
ETOP
Default setting and has to be set.
Default setting and has to be set.
Default setting and has to be set.
Site Survey
30
" page for you to
User's Manual V1.0
Advertisement
Table of Contents
