Service; Activation - Zte Zmax Quick Start Manual

Service

Activation

You will need the following information when activating service:

Your name, address and an eight-digit number that you will
use to access your account (your personal identification
number "PIN").

Your serial number (IMEI) and SIM card number. To locate
the serial number, remove the phone from the box and
remove the battery cover from the phone. The serial number
is located near the bar code. It will be either 14 or 18 digits.
The SIM card number can be located below the bottom bar
code on the back of the SIM card holder.

If your phone does not have a removable battery, check the
box label or phone settings to locate the serial number.
Your choice of MetroPCS plan and services including
unlimited data, talk and text plans.

Install the battery, if applicable, and SIM card in your new
phone by following the step by step instructions in this
phone's User Guide.

Once your phone is powered up, dial 1.888.8metro8
(1.888.863.8768) to connect with an activation representative
who will assist you in activating your phone. You can also
activate your phone online by visiting metropcs.com. (As
soon as your service is activated, be sure to fully charge the
5