Table of Contents
Advertisement
4. Remove the screws fastening the top and
the plates corresponding to each burner
zone.
5. Remove the fastening plates and the hob
top.
Installation
Replacing nozzles
1. Unscrew screw A and push air regulator B
as far as it will go.
2. Use a spanner to remove the nozzles C
and install the new ones for the required
gas supply, following the indications
given in the relevant table (see "Gas
types and Countries").
The nozzle tightening torque must
be no more than 3 Nm.
3. Adjust the air flow by moving the air
regulator B to obtain the distance D
given in the corresponding table (see
"Gas types and Countries").
4. After adjusting each burner, reassemble
the appliance correctly.
45
Advertisement
Table of Contents
