Seiko SMARTCS NS-2250 Instruction Manual page 173

5. Configure the serial ports that can be accessed by a port user.
Configure the privileges so that user01 to user03 can access serial port 1 through 32.
set user user01 port 1-32
set user user02 port 1-32
set user user03 port 1-32
6. Configure the settings of the SSH server of the NS-2250 to allow login to the NS-2250
from an SSH client. Enable the SSH server of the NS-2250, and then configure the
settings to allow access to the SSH server of the NS-2250 from all network addresses.
Finally, configure the passwords of login users registered to the NS-2250.
enable sshd
create allowhost all service sshd
set user somebody password
(password entry)
Notes
The default settings of the NS-2250 are configured to allow access to the telnet server and
port server of the NS-2250 from all networks. To delete telnet access and increase
security, carry out the following commands.
delete allowhost all service telnetd
delete allowhost all service portd telrw all
disable telnetd
4-77