Configure Ftp Sending - Seiko SMARTCS NS-2250 Instruction Manual

4.5.6

Configure FTP sending

To send port logs by FTP periodically, carry out the "add logd tty ftp" command and the
"set logd tty sendlog" command. To send the port log of serial port 5 to the FTP server
(192.168.1.1) as user "loguser2" at a 60-minute interval or when the port log reaches 80%
capacity, carry out the following commands.
(c)NS-2250# add logd tty 5 ftp 1 loguser2 192.168.1.1 password↵
FTP password ↵
Retype FTP password ↵
(c)NS-2250# set logd tty 5 sendlog ftp ratio 80↵
(c)NS-2250# set logd tty 5 sendlog ftp interval 60↵
(c)NS-2250#
The port log is saved with a file name including the serial port number and date information
to the home directory of the user of the specified FTP server. (Example file name:
"NS2250TTY02_20150807175530.log".)
Caution In environments in which port log transfers are frequent, we recommend
specifying and configuring the IP address directly and not resolving the name of
the FTP server using the DNS server.
4-26