Seiko SMARTCS NS-2250 Instruction Manual page 158

3. Set the session suspension character code for serial port 1 through serial port 8 to
"Ctrl+A".
set portd tty 1-8 cmdchar 1
Notes
The NS-2250 already stores the default settings in the startup file.
At the default settings, the host name is the NS-2250 and the LAN1 IP address is
192.168.0.1/24. Telnet Normal mode of the telnet server and port server of the NS-2250 is
configured to allow access from all networks.
(Default setting)
(c)NS-2250# show config running
set timezone Tokyo
set hostname NS-2250
set ipaddr eth1 192.168.0.1/24
set tcpkeepalive 180
#
create user setup group setup uid 198
create user verup group verup uid 199
create user log group log uid 200
create user somebody group normal uid 100
#
create allowhost all service telnetd
create allowhost all service portd telrw all
(c)NS-2250#
4-62