Stopping The Alarm/ Snooze Function; System Settings; Equaliser - Hama 00054836 Operating Instructions Manual

Table of Contents

Advertisement

15.3 Stopping the alarm/ Snooze function

Alarm tone (Buzz)
• When the alarm activates, press [VOLUME/POWER],
to stop the alarm.
• Repeatedly press [SNOOZE] on the remote control
to activate snooze mode.
• The alarm turns off for the selected time interval
(5/10/15/30/60 minutes) before activating once again.
Internet radio / DAB / FM
• When the alarm activates, press [VOLUME/POWER] to
stop the alarm.
• Repeatedly press [SNOOZE] on the remote control to
activate snooze mode.
• The alarm turns off for the selected time interval
(5/10/15/30/60 minutes) before activating once again.
• Repeatedly press [SNOOZE] on the remote control to
activate ON instead of snooze mode. The radio now stays
switched on.
• If the alarm is not stopped, the radio automatically
switches into standby mode after one hour.

16. System settings

You can modify all settings and access important
information about the radio in the System settings.

16.1 Equaliser

The equaliser allows you to adjust the sound of the
radio to suit your preferences by amplifying or reducing t
he amount of bass or treble in the audio .You can choose
from preconfigured profiles, adjusted to suit a variety of
music Genres, or create your own custom profile.
• To set the Equaliser, proceed as follows:
• Use [ENTER/NAVIGATE] to choose one of the
preconfigured profiles.
• To create your own equaliser profile, choose the
option My EQ profile setup.
• This takes you to the bass, treble and loudness
settings (volume amplification).
• To adjust a particular value, press [ENTER/NAVIGATE]
at the corresponding menu item and then change the
value by turning [ENTER/NAVIGATE]. If playback is
already started when you modify these settings, you
can hear the changes in the audio immediately.
• Confirm your settings by pressing ENTER/NAVIGATE]
once more.
• Complete the configuration process by pressing [ ]
on the device and confirm the saving of settings by
pressing [ENTER/NAVIGATE].
• To use the new profile, choose the item My EQ.
30
[ ]
System settings
Equaliser

Advertisement

Table of Contents
loading

Table of Contents