Table of Contents
Advertisement
Touch pad controls
High temperature
indicator/alert
Lower temperature
button
Temperature indicator
Setting up your freezer
Before using your freezer
•
Remove the exterior and interior packing, especially the foam packing
between the outside condenser and the cabinet.
•
Let the freezer stand upright for approximately two hours before
connecting it to power. This reduces the possibility of a malfunction in the
cooling system from improper handling during transportation.
•
Wash the inside with a damp, warm cloth and a baking soda solution (two
tablespoons in a quart of water), then wipe dry with a dry cloth. Do this
periodically to keep your freezer looking new.
•
For proper operation, it's very important that you level the freezer using
the leveling feet. If this is not done, the door may not close or seal
properly, causing cooling, frost, and moisture problems. Turn the leveling
feet clockwise to raise that side of the freezer or counterclockwise to lower
that side. The leveling feet are easier to adjust if you have someone push
against the top of the freezer to take some weight off.
•
When moving your freezer, do not tilt it beyond 45° from upright.
WiFi Connected 17 or 21 Cu.Ft. Upright Freezer
www.insigniaproducts.com
WiFi indicator
Door open
indicator/alarm
Raise temperature
button
Quick freeze
button
Control Panel
Lock/Unlock button
Freezer/Fridge
mode button
7
Hide quick links:
Advertisement
Table of Contents
