Page 1
ABOVE ANY ELECTRIC WALL OVEN. PLEASE SEE THE OPERATION MANUAL REGARDING APPROVED BUILT-IN APPLICATIONS. IMPORTANT: This Built-in Kit is designed for and approved only for those Sharp Microwave Ovens specifying Built-In Kit RK-94S27 or RK-94S30. Refer to operation manual for approved models or www.sharpusa.
Page 2
The opening in the wall or cabinet must be within the following dimensions, centered horizontal to the cabinet. FLOOR RK-94S27 RK-94S30 20" 20" 26-7/8" 29-7/8"...
Page 3
E. Carefully turn over exhaust assembly. Remove adhesive F. Remove SCREW from the upper right and left corners at backing from CUSHION L. The cushion should be applied the rear of the oven. Place duct assembly on the top of to the flanges of the duct assembly as indicated by the unit as shown and secure the duct assembly to the arrows.
Page 4
USA please call Sharp’s Customer Assistance Center at 1-800-BE-SHARP (1-800-237-4277) In Canada, call 905-568-7140 SHARP ELECTRONICS CORPORATION 1 Sharp Plaza Suite 1, Mahwah, New Jersey 07495-1123, U.S.A. SHARP ELECTRONICS OF CANADA LTD. 335 Britannia Road East Mississauga, Ontario L4Z 1W9, Canada...