Advertisement
Quick Links
I N S T A L L AT I O N I N S T R U C T I O N S
For Sharp Carousel
Models RK-42S24, RK-51S27,
RK-51K30, RK-51S30 or RK-51W30.
THIS KIT IS UL APPROVED TO ALLOW CERTAIN MICROWAVE OVENS
TO BE INSTALLED ABOVE CERTAIN CONVENTIONAL/CONVECTION
WALL OVENS. PLEASE SEE THE OPERATION MANUAL REGARDING
APPROVED BUILT-IN APPLICATIONS.
IMPORTANT :
This Built-in Kit is designed for and approved only for those Sharp
Microwave Ovens specifying Built-In Kit RK-42S24, RK-51S27, RK-51K30,
RK-51S30 or RK-51W30 on the rating label on the left side wall of the
oven cavity.
The cabinet or wall opening must be within the following dimensions:
RK-42S24
*RK-51S27, *RK-51K30,
*RK-51S30 & *RK-51W30
* IF YOUR LOWER CONVENTIONAL OVEN IS NOT LISTED IN THE OPERATION MANUAL OF
THE MICROWAVE OVEN AS AN APPROVED MAKE AND MODEL, THEN DO NOT INSTALL
THE MICROWAVE OVEN ABOVE IT OR IN ANY AREA WHERE HEAT AND STEAM ARE
GENERATED; FOR EXAMPLE, NEXT TO OR ABOVE A CONVENTIONAL RANGE.
S= Stainless, K=Black, W=White
PLEASE READ THESE INSTRUCTIONS THOROUGHLY BEFORE
BEGINNING INSTALLATION!
• Be sure to DISCONNECT THE PLUG of the microwave oven from the
electrical outlet before installing the Built-in Kit. Remove the Carousel
turntable from the oven cavity.
• Because the kit includes metal parts, due caution should be used in
handling and installation to avoid the possibility of injury.
1
4
®
Built-in Kit
®
HEIGHT : 15
11
/
" to 16"
16
1
WIDTH
: 22
/
" to 22
16
DEPTH
: minimum 19
3
HEIGHT : 16
/
" to 17"
4
WIDTH
: 24
3
/
" to 24
8
DEPTH
: minimum 20"
2
5
NO.
PART NAME
PART CODE
1
FRAME ASSEMBLY
S24 - FDECAB015MRY0
S27 - FDECAB008MRY0
S30 - FDECAB018MRY0
K30 - FDECAB019MRY0
W30 - FDECAB020MRY0
3
/
"
2
EXHAUST DUCT ASSEMBLY
8
S24 - FDUC-B019MRK0
1
/
"
4
S27 - FDUC-B032MRK0
S30 - FDUC-B032MRK0
K30 - FDUC-B032MRK0
11
/
"
16
W30 - FDUC-B032MRK0
3
POWER SUPPLY CORD
BOX ASSEMBLY
FCOVHB004MRK0
4
REAR DUCT
PDUC-B072MRP0
5
SCREW A
XCTSD40P10000
6
SCREW B
XTTSD40P30000
7
SCREW C
S24 - LX-CZB012MRE0
S27 - LX-CZB012MRE0
S30 - LX-CZB012MRE0
K30 - LX-CZB014MRE0
W30 - LX-CZB015MRE0
6
1
QTY
1
1
1
1
3
2
4
3
7
Advertisement
Related Manuals for Sharp Carousel RK-42S24
Summary of Contents for Sharp Carousel RK-42S24
- Page 1 IMPORTANT : PART NAME PART CODE This Built-in Kit is designed for and approved only for those Sharp Microwave Ovens specifying Built-In Kit RK-42S24, RK-51S27, RK-51K30, FRAME ASSEMBLY RK-51S30 or RK-51W30 on the rating label on the left side wall of the S24 - FDECAB015MRY0 oven cavity.
- Page 2 STEP 1 CABINET OR WALL OPENING The opening in the wall or cabinet must be within the following dimensions: RK-42S24: HEIGHT : " to 16" WIDTH : " to 22 " DEPTH : minimum 19 " 6" 4" *RK-51S27, HEIGHT : "...
- Page 3 STEP 3 POWER SUPPLY CORD BOX ASSEMBLY AND REAR DUCT INSTALLATION 1. Roll the power supply cord into the REAR DUCT. 2. Remove the screw from left top of outer cabinet. Secure the left flange of the REAR DUCT with the screw removed from the oven and secure the right flange of the REAR DUCT with SCREW A.
- Page 4 SCREW C SCREW C SCREW C Sketch 8 SCREW C For any other assistance or information about this kit, please call Sharp’s Customer Assistance Center at 1-800-BE-SHARP (1-800-237-4277) SHARP ELECTRONICS CORPORATION TINSEB279MRR0 Printed in U.S.A. Sharp Plaza, Mahwah, New Jersey 07430-2135...