Ha100 Connection; Powering And Connecting The Ha100; Optional Connections; Figure 7: Basic Connection On Ha100 - Grandstream Networks HA100 User Manual

Hide thumbs Also See for HA100:

Table of Contents

HA100 CONNECTION

This section provides the connection types and steps needed for connecting the HA100 with 2 UCM6510.

The external connections are used on the external ports for following purposes:

Powering up the HA100, network connection, PSTN lines connection, Analog/Fax connection and also

digital (T1/E1/J1) connections.

Please refer to following steps for the basic connection on the HA100:

1. Connect one end of the Ethernet cable to the WAN port of the HA100, connect the other end of the

cable to the uplink of a hub or switch.

2. Connect 12V power adapter to the 12V power port on HA100, connect the other end to the power

jack.

Please refer to followings steps for the optional connections on the HA100:

1. For PSTN connection: Connect a PSTN cable to the FXO external port on HA100.

2. For Analog phone/Fax connection: Connect analog phone or FAX machine to the FXS external

port on HA100.

3. For T1/E1/J1 connection: Bring your digital connection cable from the service provider side to the

T1/E1/J1 external port on HA100.

4. For LAN connection: Connect one end of the Ethernet cable to the LAN external port on HA100,

connect the other end to switch, hub or etc.

HA100 User Manual

P a g e

Table of Contents