Page 1
DOREL ASIA 5-PIECE DINING SET Model No: WM2412RDC UPC CODE: 0-65857-15763-5 NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. Lot number: (TAKEN FROM CARTON) Date of purchase: _______ / _______ / _______ DO NOT RETURN PRODUCT TO THE STORE.
LIMITED WARRANTY Dorel Asia warrants its product to be free from defects in material and workmanship and agrees to remedy any such defect. This warranty covers 1 year from the date of original purchase. This warranty is valid only upon presentation of proof of purchase.
5-PIECE DINING SET WM2412RDC HARDWARE LIST 5/32"* 1-1/8"LG 1/4"* 1/2"LG HEX SOCKET PHILLIPS COUNTERSINK RUBBER PAD HEAD BOLT HEAD SCREW 4 PCS 76 PCS 16 PCS ALLEN KEY 1 PC PARTS LIST RIGHT LEG SEAT FRAME BACK FRAME LEFT LEG...
Page 4
5-PIECE DINING SET 5-PIECE DINING SET WM2412-1 WM2412RDC STEP 1 Attach left leg (B) and right leg (C) to the seat frame (D) with hex socket head bolts (1). eft leg(B) and right leg(C) to the seat frame(D) with hex socket head bolts(1).Use Use Allen key (4) to install bolts (1).
Page 5
5-PIECE DINING SET 5-PIECE DINING SET WM2412-1 WM2412RDC STEP 2 SETP2 Attach seat frame (D) to back frame (A) with hex socket head bolts (1). Attach seat frame(D) to back frame(A)with hex socket head bolts(1). Use Allen key(5) to Use Allen key (4) to install bolts.
Page 6
5-PIECE DINING SET 5-PIECE DINING SET WM2412-1 WM2412RDC SETP3 Attach tube base(E) to back frame(A)and left and right legs(B)&(C)with hex socket head bolts(1). Use Allen key(5) to install bolts. STEP 3 NOTE: That the mounting brackets on tube base(E) have to be positioned in a way that they follow the angle with the chair legs.
Page 7
WM2412-1 5-PIECE DINING SET WM2412RDC STEP 4 cushion(F) to seat frame(D)with Phillips countersink head screws(3).Use Phillips Place seat cushion (F) upside down on a clean, smooth surface. Attach seat cushion (F) driver(not included) to install screws. Repeat steps 1 through 4 to assemble to seat frame (D) with Phillips countersink head screws (2).
Page 8
5-PIECE DINING SET WM2412RDC STEP 5 Attach table legs (G) to top frame (I) with hex socket head bolts (1). Use Allen key (4) to install bolts. NOTE: Do not fully tighten bolts. Loose bolts will help you to assemble other parts in...
Page 9
5-PIECE DINING SET WM2412RDC STEP 6 Attach table tube base (H) to table legs (G) with hex socket head bolts (1). Use Allen key (4) to install bolts. NOTE: Tighten all bolts installed in steps 5 & 6.
Page 10
5-PIECE DINING SET WM2412RDC STEP 7 Place rubber pads (3) onto top frame (I). With the help of another person, gently place glass top (J) onto table frame. Ensure the glass top is placed in the center of the table...
Page 11
5-PIECE DINING SET WM2412RDC CAUTION: This unit is intended for use only with the products and/or maximum weights indicated. Use with other products and/or products heavier than the maximum weights indicated may result in instability or cause possible injury. Product...
MODEL #: WM2412RDC C B D Customer Service PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE PLEASE CONTACT CUSTOMER SERVICE REPRESENTATIVES AT THE FOLLOWING NUMBERS SHOULD THERE BE ANY MISSING OR DEFECTIVE PART(S). Customer Service Phone Number 1-800-295-1980 Email: das@dorel.com...
Need help?
Do you have a question about the WM2412RDC and is the answer not in the manual?
Questions and answers