De processorventilator
terugplaatsen
GEVAAR: Volg de veiligheidsinstructies die bij de computer werden geleverd
alvorens u werkzaamheden binnen de computer uitvoert en volg de stappen
in
Voordat u in de computer gaat
computer volgt u de instructies in
Raadpleeg voor meer informatie over aanbevolen procedures op het gebied
van veiligheid onze website over de naleving van wet- en regelgeving op
www.dell.com/regulatory_compliance.
Procedure
1
Align the screw holes on the processor fan with the screw holes on the heat
sink.
2
Replace the four screws (M6xL10) that secure the processor fan to the heat
sink.
3
Connect the processor-fan cable to the system board.
4
Rotate the side-chassis towards the computer until it snaps into place.
Post-requisites
1
Replace the
front
2
Replace the
computer
bezel.
cover.
werken. Na het werken binnen uw
nadat u in uw computer heeft
gewerkt.
61