Table of Contents
Advertisement
This function allows you to set a timer recording without using
the on-screen menus. Complete each step within one minute of
the previous step.
1
Press the TURBO TIMER button on the remote control.
The current time will appear on the display panel.
2
To set the START time, press the PLAY 8 or STOP 9
button until the desired start time appears on the display
panel. Every time you press a button, the start time changes in
one-minute increments. If you press and hold a button, the start
time changes in 30-minute increments.
When the correct START time appears, press the
OK/STATUS button.
3
The START time will continue to appear on the display panel. To
set the STOP time, press the PLAY 8 or STOP 9 button.
Every time you press a button, the stop time changes in one-
minute increments. If you press and hold a button, the stop time
changes in 30-minute increments. When the correct STOP
time appears, press the OK/STATUS button.
4
The current channel number will appear on the display panel. To
select the channel you want to record, press the PLAY 8
or STOP 9 button. Every time you press a button, the channel
changes once. If you press and hold the button, the channels will
change rapidly. When the correct channel number appears,
press the OK/STATUS button.
5
The normal display will appear, and the r light will appear on the
display panel.
SLP
VCR
SLP
VCR
SLP
VCR
SLP
VCR
Turbo Timer 41
CBL / DBS
VCR/TV
POWER
QUICK PROGRAMMING
+
1
START
STOP
-
4
DAILY
7
SPEED
DBS
ALT
STILL/SLOW
-
REW
2-4
PLAY
STOP
VOL
OK/STATUS
MENU
TIMER
1
TURBO
AUDIO/
TIMER
MUTE
EJECT
Helpful Hints
• If "Err" (error) appears on the display
panel when you press the TURBO
TIMER button, either the clock is not
set or you have set eight timer record-
ings already. The VCR will not let you
set more than eight timer recordings.
• Use Turbo Timer to set a timer record-
ing within the next 24 hours only.
• Turbo Timer information will appear
on the display panel only, not on the
TV screen.
• The Program Overlap Warning does
not function with Turbo Timer. The
timer recording with the earliest start
time will record. Then, the remaining
portion of the later recording will
record.
• To exit Turbo Timer mode at any time,
press the TURBO TIMER button.
• DAILY or WEEKLY timer recordings
can not be set with Turbo Timer.
• Tape speed can be selected at any
time during steps 2-4 by pressing the
ALT/SPEED button.
TV
VCR
SMARTPICTURE
+
2
3
DATE
-
5
6
WEEKLY
8
9
0
CLEAR
+
FF
CH
SKIP
REC END
SEARCH
SEARCH
/OTR
REC
REC
Advertisement
Table of Contents
