Automatic Channel Setup 11 - Philips VRB615AT Owner's Manual

4 hd hifi clock vcr

Hide thumbs Also See for VRB615AT:

Specifications (2 pages)

Hookup pages (10 pages)

Table Of Contents

Table of Contents

Although your VCR may automatically memorize the channels you

receive when you turn it on for the first time, this function lets

you set up channels again. Make each entry within one minute of

the previous entry.

Press the VCR button, then press the MENU button.

VCR SET UP

TUNER SET UP

INITIAL SET UP

SELECT: KL

CONFIRM: OK

END: MENU

Press the PLAY K or STOP L button to select TUNER

SET UP, then press the OK/STATUS button.

CABLE/ANTENNA

CABLE

AUTO CH. PROGRAMMING

ADD/DELETE CH.

SELECT: KL

CHANGE: '

END: MENU

Press the FF - button repeatedly so that ANT (if you

have an antenna) or CABLE (if you have a cable connec-

tion) appears beside CABLE/ANTENNA.

Press the STOP p button to select AUTO CH. PRO-

GRAMMING, then press the OK/STATUS button. AUTO

CH. SET PROCEEDING PLEASE WAIT and a scale that shows the

progress of channel setup will appear on the screen. The VCR will

memorize all the channels you receive.

Wait for a few minutes while the VCR sets up channels.

When programming is complete, AUTO CH. SET COMPLETED

will appear on the screen. Then, the programming of the lowest

channel number placed in the VCR's memory will appear on the

screen. Now when you press the CH(annel) o/p button, you will

scan only through channels you receive.