Thank you for purchasing this Yamaha product. This wireless speaker is a Bluetooth® speaker that you can take anywhere you like and enjoy music from a smart device whenever you want to. Be sure to read the included Safety Brochure to ensure proper and safe use. Keep it readily available for future reference.
Control buttons Power button Power lamp Play/Pause button Volume buttons During playback, press the button twice Adjust the volume. quickly to skip to the next song, or three times to skip backward to the beginning of the current song or previous song. Clear Voice lamp Clear Voice button When the Clear Voice function is...
CAUTION Use a commercially available USB power adapter that can output DC 5 V (2 A or more) when charging the unit. A charging cradle (Yamaha CC-T1A; sold separately) can also be used to charge the unit. USB power adapter...
Turning on the unit 1 ・ ・ ・ 2 ・ ・ ・ Hold down the power button to turn on the unit. The power lamp flashes to inform you of the remaining battery level. − Flashing white: Remaining battery level is more than half. −...
(R) ( p. 4) button simultaneously for at least five seconds. On the Bluetooth device, enable the Bluetooth function. On the Bluetooth device, select this unit (Yamaha WS-B1A) from the list of available devices to connect to. If a passkey is required, enter the number “0000”.
If the unit still does not function properly even after following these instructions, turn off the unit and contact the nearest authorized Yamaha dealer or service center. The unit cannot be charged / It takes a long time to charge A USB power adapter that is not compatible with the unit is being used.
Page 9
Turn on the unit again. ( p. 6) Ambient temperature is too high or too low. Use the unit within the operating temperature range. ( p. 15) The rechargeable battery in the unit has deteriorated. Contact the nearest authorized or Yamaha dealer or service center.
Page 10
The unit cannot be connected to a Bluetooth device The name of this unit is not displayed in the list of available devices to connect to on the Bluetooth device. Try disabling and re-enabling the Bluetooth function of the Bluetooth device. The name of this unit may then be displayed.
Page 11
No sound The unit and Bluetooth device are not connected. Connect to the Bluetooth device. ( p. 7) The volume is too low. Turn up the volume. ( p. 4) Broken, distorted, or unusual sound is heard from the unit The volume is too high.
Restarting or initializing the unit If the unit does not function properly after following the instructions described in “Troubleshooting”, restart or initialize (factory reset) the unit. Restarting the unit Press and hold the power button for at least 10 seconds to restart the unit. The connection information will not be deleted even if the unit is restarted.
List of lamp displays The status of this unit is shown by the color of the lamp (white, blue, or orange) and by glowing/ flashing. Clear Voice Power lamp Power status Status of the unit Solution lamp Connected to a −...
Page 14
5 to 10 minutes. white alternately * If an error occurs and the unit does not function properly even after following the instructions to solve the problem, turn off the unit and contact the nearest authorized Yamaha dealer or service center.
5°C to 35°C The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Yamaha Corporation is under license. Other trademarks and trade names are those of their respective owners.
Need help?
Do you have a question about the WS-B1A and is the answer not in the manual?
Questions and answers