Setting The Clock 15 - Philips VRA631AT Owner's Manual

There are two ways to set the clock. With manual clock setting,
you tell the VCR the current time. With automatic clock setting,
the VCR gets the current time from your local PBS station. It
keeps track of the time by constantly referring to the time broad-
casted by your PBS station.
If you are using a Cable Box or Direct Broadcast System,
you must set the clock manually.
Follow the instructions under either manual clock setting or auto-
matic clock setting (page 17) to set the VCR's clock. Before you
begin, make sure:
The VCR is hooked up and turned on, and channels are pro-
grammed into the VCR's memory (see pages six - 12).
The VCR is in VCR position. The VCR light will appear on the
display panel. If it does not, press the VCR/TV button once.
Do each step within 60 seconds of the previous step.
Manual Clock Setting
1
Press the VCR button.
2
Press the MENU button.
3
Press the PLAY/o button or the STOP/p button to select
SET CLOCK, then press the F.FWD/B button.
4
Press the PLAY/o button or the STOP/p button to select
SET MANUAL CLOCK, then press the F.FWD/B button.

Setting the Clock 15

3-4
POWER VCR/TV EJECT
1
TV
PLAY
REW F.FWD
STOP
2
STATUS/EXIT
1 2 3
4 5 6
7 8 9
VCR PLUS+/ENTER ALT. CH
0
SPEED TIME SEARCH PAUSE/STILL
REC/OTR MEMORY SLOW
Helpful Hints
• To display the time on the TV
screen, press the STATUS/EXIT but-
ton. Details are on page 26.
• Power failures that last for more
than one minute can cause you to
lose your clock setting if you set the
clock manually. If this happens,
reset the clock.
• This VCR is ready for the year 2000
and the years beyond. To set a date in
the year 2000, enter 00 for the year
in step 6.
CH
VOL
MUTE