Rerecording (Tape Duplication); Playing - Philips VRA631AT Owner's Manual

42 Rerecording (Tape Duplication)

1. Audio cables from AUDIO OUT Jacks
of VCR 1 to AUDIO IN Jacks of VCR 2
VCR 1
Playing VCR
ANT
AUDIO
L
OUT IN
R
VIDEO
OUT
CH3 CH4
OUT IN
Audio and Video cables are not supplied.
1
Make the connections shown above.
2
VCR 1 will play your tape. Put a prerecorded tape in VCR 1.
3
VCR 2 will record your tape. Insert a blank tape in VCR 2.
The VCR must be in VCR position. (The VCR light will appear on
the display panel. If it does not, press the VCR/TV button once.)
4
Turn on the TV and set it to channel 03 or 04, whichever
channel the CH3/CH4 switch on VCR 2 is set to.
5
Point the remote control at VCR 2. Press the VCR but-
ton, then press Number buttons 0, 0, 1 or 0, 0, 2. (See
Helpful Hints at right.)
6
Press the SPEED button to select SP or SLP at VCR 2.
7
Press the PLAY button on VCR 1 and the REC(ord)/OTR
button on VCR 2 at the same time.
To stop recording, press the STOP/EJECT button on VCR 1, then
press the STOP/EJECT button on VCR 2.
IN
2. Video cable from VIDEO OUT Jack
of VCR 1 to VIDEO IN Jack of VCR 2
VCR 2 - Recording VCR
• If you use the AUDIO and VIDEO
• If you use the AUDIO and VIDEO
• Unauthorized recording of copy-
• If a program has copy guard pro-
• These instructions show you how to
ANT
AUDIO
IN
L
OUT IN
R
VIDEO
OUT
CH3 CH4
IN
OUT
3. RF coaxial cable
from the OUT jack
of VCR 2 to the
TV's ANTENNA IN
Helpful Hints
IN Jacks on the back of VCR 2,
press Number buttons 0, 0, 1. AV
REAR will appear on the screen.
(Blue Background should be set to
ON. Details are on page 13.)
In Jacks on the front of VCR 2,
press Number buttons 0, 0, 2. AV
FRONT will appear on the screen.
(Blue Background should be set to
ON. Details are on page 13.)
righted television programs, video
tapes, or other materials may
infringe on the rights of copyright
owners and violate copyright laws.
tection, it may not record clearly.
copy tapes using two VCRs like
yours. Different VCRs may operate
differently.