BMW X1 Owner's Handbook Manual page 97

Resetting average values
Keep the button pressed on the turn indicator
lever.
Engine temperature display
Displays current engine temperature from a
combination of coolant and engine oil temper‐
ature. Display is in middle position as soon as
optimum operating temperature has been
reached.
If the engine oil or coolant and therefore the
engine become too hot, a Check Control mes‐
sage is displayed as well.
Check coolant level, see page 214.
Distance to destination
The remaining distance to the destination is
displayed if a destination was entered in the
navigation system before the start of the jour‐
ney.
The distance to the destination is automati‐
cally adopted.
Arrival time
The estimated time of arrival is
displayed if a destination was
entered in the navigation system
before the start of the journey.
A precondition is that the time is correctly set.
Speed Limit Information
Description of Speed Limit Information, see
page 93.
Online Edition for Part no. 01 40 2 964 279 - VI/15
Displays
Journey computer
Two types of on-board computer are available.
▷ "On-board computer": values can be reset
any number of times.
▷ "Trip computer": values deliver an over‐
view of the current trip.
Resetting the Journey computer
On the Control Display:
1. "Vehicle information"
2. "Trip computer"
3. "Reset": all values are reset.
"Reset automatically": all values are reset if
the vehicle is at a standstill for approxi‐
mately four hours.
Display on the Control Display
Display the on-board computer or Journey
computer on the Control Display.
On the Control Display:
1. "Vehicle information"
2. "On-board computer" or "Trip computer"
Resetting fuel consumption and speed
On the Control Display:
1. "Vehicle information"
2. "On-board computer"
3. "Consumpt." or "Speed"
4. "Yes"
Sport displays
Principle
On the Control Display, sports instruments can
be shown and the drive state is checked before
using the SPORT program.
Controls
97