BMW X1 Owner's Handbook Manual page 67

Not for Australia/New Zealand: front
passenger seat
The brackets for the lower ISOFIX anchors are
located in the gap between the seat and back‐
rest.
Before fitting ISOFIX child restraints
Pull the belt out of the area of the child seat
mountings.
Fitting of ISOFIX child restraint
systems
1. Install the child restraint system, see man‐
ufacturer's information.
2. Make sure that both ISOFIX anchors have
snapped into place.
Upper ISOFIX retaining strap
Mounting points
The symbol shows the mounting point
for the upper retaining strap.
There are two mounting points for the upper
retaining strap of ISOFIX child restraints.
Online Edition for Part no. 01 40 2 964 279 - VI/15
Carrying children in safety
Note
ATTENTION
The mounting points for the upper re‐
taining straps of child restraint systems are
only intended for these retaining straps. The
mounting points can be damaged if other ob‐
jects are attached. Danger of damage to prop‐
erty. Only attach child restraint systems to the
upper retaining straps.◀
Guiding the retaining strap
WARNING
If the upper retaining strap is used incor‐
rectly with the child restraint system, the pro‐
tective effect may be reduced. Danger of in‐
jury. Make sure that the upper retaining strap is
not routed to the upper attachment strap over
sharp edges, and that it is not twisted.◀
1 Direction of travel
2 Head restraint
3 Hook for the upper retaining strap
4 Mounting point
5 Seat backrest
6 Upper retaining strap
Attaching the upper retaining strap to
the mounting point
1. Raise head restraint if necessary.
2. On the rear seat: Guide the upper seat belt
on the brackets of the head restraint.
3. Guide the holding belt between the back‐
rest and luggage cover.
Controls
67