BMW X1 Owner's Handbook Manual page 222

Mobility
for the washer fluid using the screwdriver
from the on-board tool kit.
2. Turn the bulb holder anticlockwise and re‐
move.
3. Press the bulb gently into the fitting, turn
anticlockwise and remove.
4. Fit new bulb and bulb holder in the reverse
sequence.
Front fog lights
Follow the general information, see page 218.
H8 bulb, 35 watts.
1. Place flat side of screwdriver from on-
board toolkit on clip, arrow 1.
2. Turn screwdriver 90°, see arrow 2.
222
Replacing parts
Online Edition for Part no. 01 40 2 964 279 - VI/15
3. Remove fog light forwards.
4. Loosen connector.
5. Turn lamp holder and remove.
6. Take out the bulb and change it.
7. To insert the fog lamp, carry out the same
procedure in reverse order. Observe the
guide rails when doing this.
Turn indicator in exterior mirror
Turn indicators in the exterior mirrors are de‐
signed in the LED technology. Contact a Serv‐
ice Partner or a qualified specialist workshop in
the case of a defect.